Flexijet 3D is a mobile and flexible measuring system. It consists of a laser distance-measuring device mounting on a turning-rotating unit and a professional 3D-Measuring-Software. A fundamental characteristic of Flexijet 3D is that you can move the laser both manually and motor-driven to the aiming point.

In most cases, the laser is moved manually to the aiming point. For example, when measuring a space, it is not necessary to measure the corner connecting two walls. It is adequate when only 2 points on a wall (red points) are measured -that are close to the corner- and the corners will then be automatically connected by the software.

• Laser distance measuring device Leica Disto D8
• The laser can be moved both manual and motor-driven  
• Integrated inclination censor; therefore, no intricate adjustment of the stand with a spirit level or digital laser level is necessary
• Jolt censor: A signal is sent when an accidental jolt towards the device occurs. Yet Flexijet can be adjusted at points that are already measured so that the measurement process can be resumed.  
• Battery control: the battery performance averages out to approx. 8 hours. The residual battery time will be displayed in FlexiCAD.
• Bluetooth connection between measuring device and laptop:  guarantees the optimal mobility.
• Powerful and efficient motors enable the device to position quickly
• Sensitive remote controlling enables the exact start-up and measuring of the point of aim
• Activation of the measurement is contact free over a censor in the box, with remote controller or per key press on the laptop
• Vertical and horizontal measurement rate: 0-360 Degrees
• Relocation: Place the device to another position or to another floor and readjust the measurement
• Top-quality tripod and case with support for laptop