{"id":16032,"date":"2025-01-30T15:35:37","date_gmt":"2025-01-30T14:35:37","guid":{"rendered":"https:\/\/www.flexijet.info\/en\/?page_id=16032"},"modified":"2026-02-20T10:15:35","modified_gmt":"2026-02-20T09:15:35","slug":"flexicad-update-info","status":"publish","type":"page","link":"https:\/\/www.flexijet.info\/en\/products\/flexicad4-measurement-software\/flexicad-update-info\/","title":{"rendered":"FlexiCAD-Update-Info"},"content":{"rendered":"<div id='av-layout-grid-1'  class='av-layout-grid-container av-m8mw9v7t-8dc89e9de4b90c8faf7927c2eefdd899 entry-content-wrapper main_color av-flex-cells  avia-builder-el-0  el_before_av_toggle_container  avia-builder-el-first  max1210px  container_wrap sidebar_right'  >\n\n<style type=\"text\/css\" data-created_by=\"avia_inline_auto\" id=\"style-css-av-m8mwdobh-2dfab03e996de6c6abffe3bbc182d04b\">\n.flex_cell.av-m8mwdobh-2dfab03e996de6c6abffe3bbc182d04b{\nvertical-align:bottom;\n}\n<\/style>\n<div class='flex_cell av-m8mwdobh-2dfab03e996de6c6abffe3bbc182d04b av-gridrow-cell av_two_third no_margin  avia-builder-el-1  el_before_av_cell_one_third  avia-builder-el-first  content-align-bottom'  ><div class='flex_cell_inner'><section  class='av_textblock_section av-m6jf0kf4-7e71c9ddd819b71fefb1c723ab845ea9 '   itemscope=\"itemscope\" itemtype=\"https:\/\/schema.org\/CreativeWork\" ><div class='avia_textblock'  itemprop=\"text\" ><p><strong>To show version info, please click on the desired FlexiCAD version.<\/strong><\/p>\n<\/div><\/section>\n<\/div><\/div><div class='flex_cell av-ob145c-49456547dfd2de697fe9a57ea6cbbf8e av-gridrow-cell av_one_third no_margin  avia-builder-el-3  el_after_av_cell_two_third  avia-builder-el-last '  ><div class='flex_cell_inner'><section  class='av_textblock_section av-m8mwaux9-a60035b71d0171ee6965ea16a91a0906 '   itemscope=\"itemscope\" itemtype=\"https:\/\/schema.org\/CreativeWork\" ><div class='avia_textblock'  itemprop=\"text\" ><p>Download the latest version of FlexiCAD4 here:<\/p>\n<div  class='avia-button-wrap av-jwf8o7-04bfa91fc160094fda56e033e4ae6864-wrap avia-button-left  avia-builder-el-5  avia-builder-el-no-sibling '>\n<style type=\"text\/css\" data-created_by=\"avia_inline_auto\" id=\"style-css-av-jwf8o7-04bfa91fc160094fda56e033e4ae6864\">\n#top #wrap_all .avia-button.av-jwf8o7-04bfa91fc160094fda56e033e4ae6864{\nbackground-color:#bd131c;\nborder-color:#bd131c;\ncolor:#ffffff;\ntransition:all 0.4s ease-in-out;\n}\n#top #wrap_all .avia-button.av-jwf8o7-04bfa91fc160094fda56e033e4ae6864:hover{\nbackground-color:#bc6064;\ncolor:white;\ntransition:all 0.4s ease-in-out;\n}\n#top #wrap_all .avia-button.av-jwf8o7-04bfa91fc160094fda56e033e4ae6864 .avia-svg-icon svg:first-child{\nfill:#ffffff;\nstroke:#ffffff;\n}\n#top #wrap_all .avia-button.av-jwf8o7-04bfa91fc160094fda56e033e4ae6864:hover .avia-svg-icon svg:first-child{\nfill:white;\nstroke:white;\n}\n<\/style>\n<a href='https:\/\/www.flexijet.info\/download\/FlexiCAD\/SetupFlexiCAD4.exe'  class='avia-button av-jwf8o7-04bfa91fc160094fda56e033e4ae6864 av-download-btn noLightbox avia-icon_select-yes-left-icon avia-size-medium avia-position-left' download  aria-label=\"FlexiCAD4 Download\"><span class='avia_button_icon avia_button_icon_left avia-svg-icon avia-font-svg_entypo-fontello' data-av_svg_icon='download' data-av_iconset='svg_entypo-fontello'><svg version=\"1.1\" xmlns=\"http:\/\/www.w3.org\/2000\/svg\" width=\"32\" height=\"32\" viewBox=\"0 0 32 32\" preserveAspectRatio=\"xMidYMid meet\" aria-labelledby='av-svg-title-1' aria-describedby='av-svg-desc-1' role=\"graphics-symbol\">\n<title id='av-svg-title-1'>Download<\/title>\n<desc id='av-svg-desc-1'>Download<\/desc>\n<path d=\"M30.976 20.864q0.576 0.32 0.864 1.024t0.096 1.28l-0.896 4.928q-0.128 0.64-0.704 1.056t-1.28 0.416h-26.112q-0.704 0-1.28-0.416t-0.704-1.056l-0.896-4.928q-0.32-1.536 1.024-2.304l5.056-3.456h3.136l-5.44 4.16h5.696q0.256 0 0.384 0.256l1.28 3.52h9.6l1.28-3.52q0.256-0.256 0.384-0.256h5.696l-5.44-4.16h3.136zM24.32 10.56l-8.32 7.808-8.32-7.808h5.312v-8.192h6.080v8.192h5.248z\"><\/path>\n<\/svg><\/span><span class='avia_iconbox_title' >FlexiCAD4 Download<\/span><\/a><\/div>\n<\/div><\/section>\n<\/div><\/div>\n<\/div><div id='after_grid_row_1'  class='main_color av_default_container_wrap container_wrap sidebar_right'  ><div class='container av-section-cont-open' ><div class='template-page content  av-content-small alpha units'><div class='post-entry post-entry-type-page post-entry-16032'><div class='entry-content-wrapper clearfix'>\n\n<style type=\"text\/css\" data-created_by=\"avia_inline_auto\" id=\"style-css-av-m6jftkef-5b8da5881ed259c7cca00e37d3ae71bf\">\n#top .togglecontainer.av-m6jftkef-5b8da5881ed259c7cca00e37d3ae71bf p.toggler{\nbackground-color:rgba(214,214,214,0.5);\n}\n#top .togglecontainer.av-m6jftkef-5b8da5881ed259c7cca00e37d3ae71bf p.toggler.activeTitle{\ncolor:#bb1723;\nborder-color:#bb1723;\n}\n#top .togglecontainer.av-m6jftkef-5b8da5881ed259c7cca00e37d3ae71bf p.toggler:not(.activeTitle):hover{\ncolor:#bb1723;\n}\n#top .togglecontainer.av-m6jftkef-5b8da5881ed259c7cca00e37d3ae71bf p.toggler:not(.activeTitle):hover .toggle_icon, #top .togglecontainer.av-m6jftkef-5b8da5881ed259c7cca00e37d3ae71bf p.toggler:not(.activeTitle):hover .toggle_icon *{\nborder-color:#bb1723 !important;\n}\n#top .togglecontainer.av-m6jftkef-5b8da5881ed259c7cca00e37d3ae71bf p.toggler .toggle_icon{\ncolor:#bb1723;\nborder-color:#bb1723;\n}\n#top .togglecontainer.av-m6jftkef-5b8da5881ed259c7cca00e37d3ae71bf p.toggler .toggle_icon > span{\ncolor:#bb1723;\nborder-color:#bb1723;\n}\n#top .togglecontainer.av-m6jftkef-5b8da5881ed259c7cca00e37d3ae71bf .toggle_wrap .toggle_content{\nbackground-color:rgba(214,214,214,0.5);\n}\n<\/style>\n<div  class='togglecontainer av-m6jftkef-5b8da5881ed259c7cca00e37d3ae71bf av-minimal-toggle  avia-builder-el-6  el_after_av_layout_row  avia-builder-el-no-sibling  toggle_close_all' >\n<section class='av_toggle_section av-mluo41co-e1d5f415840bbc0651a25f91f107775d'  itemscope=\"itemscope\" itemtype=\"https:\/\/schema.org\/CreativeWork\" ><div role=\"tablist\" class=\"single_toggle\" data-tags=\"{All} \"  ><p id='toggle-toggle-id-1' data-fake-id='#toggle-id-1' class='toggler  av-title-above '  itemprop=\"headline\"  role='tab' tabindex='0' aria-controls='toggle-id-1' data-slide-speed=\"200\" data-title=\"FlexiCAD Version 4.2.1.0 - release date: 23.02.2026\" data-title-open=\"\" data-aria_collapsed=\"Click to expand: FlexiCAD Version 4.2.1.0 - release date: 23.02.2026\" data-aria_expanded=\"Click to collapse: FlexiCAD Version 4.2.1.0 - release date: 23.02.2026\">FlexiCAD Version 4.2.1.0 - release date: 23.02.2026<span class=\"toggle_icon\"><span class=\"vert_icon\"><\/span><span class=\"hor_icon\"><\/span><\/span><\/p><div id='toggle-id-1' aria-labelledby='toggle-toggle-id-1' role='region' class='toggle_wrap  av-title-above'  ><div class='toggle_content invers-color '  itemprop=\"text\" ><p><strong>This update expands the interfaces for even smoother data transfer to third-party programs and refines the control of export and display options.<\/strong><\/p>\n<h3>Improved stability and reliability:<\/h3>\n<ul>\n<li><strong>Consistent point scaling:<\/strong> A problem with scaling measurement and location points has been fixed. These are now displayed correctly even when a drawing is opened with units other than those currently preset in FlexiCAD.<\/li>\n<li><strong>Reliable export of &#8220;From Layer&#8221; objects:<\/strong> We have ensured that objects with the pen color <strong>&#8220;From Layer&#8221;<\/strong> are consistently included in all export scenarios.<\/li>\n<li><strong>Object thickness<\/strong>\n<ul>\n<li>In the &#8220;General Settings,&#8221; the validation for object heights has been adjusted: The value <strong>&#8220;0&#8221;<\/strong> is now accepted correctly without a<br \/>\nwarning message regarding negative values appearing.<\/li>\n<li>For the French language version, the selection of special symbols has been translated.<\/li>\n<\/ul>\n<\/li>\n<\/ul>\n<hr \/>\n<h3>Enhanced functionality<\/h3>\n<ul>\n<li><strong>Precise export control by layer &amp; style:<\/strong> Exporting to specific layers is now based exclusively on <strong>the specified pen color or pen style<\/strong>. The dependency on the general layer color has been removed in favor of more precise control.<\/li>\n<li><strong>Advanced color dialog &amp; line type:<\/strong> In the advanced color dialog, the line type <strong>&#8220;From layer&#8221;<\/strong> can now be explicitly set as a style, which provides more flexibility in the drawing structure.<\/li>\n<\/ul>\n<hr \/>\n<h3><strong>New features<\/strong><\/h3>\n<ul>\n<li><strong>Extensive upgrade of the .egi export<\/strong>\n<ul>\n<li><strong>Room elements:<\/strong> All internal room elements are now exported as obstacles, which significantly increases visibility and planning reliability<br \/>\nwhen transferring to kitchen programs.<\/li>\n<li><strong>Softronik extension:<\/strong> Specific element texts have been added for export to Softronic.<\/li>\n<\/ul>\n<\/li>\n<li><strong>XML export version 1.4 available<\/strong>\n<ul>\n<li>From now on, XML export in version 1.4, also supports the export of images (compatible with HiCAD 2026 SP1).<\/li>\n<li>A new export menu allows you to conveniently choose between XML versions 1.3 and 1.4.<\/li>\n<\/ul>\n<\/li>\n<li><strong>New export format SmartWOP (.xml):<\/strong> Exports an XML file for the SmartWOP software.<br \/>\n<a href=\"https:\/\/www.flexijet.info\/en\/wp-content\/uploads\/2026\/02\/Neuer-Export-SmartWOP-xml_en.png\"><img decoding=\"async\" class=\"alignnone wp-image-17142 size-full\" src=\"https:\/\/www.flexijet.info\/en\/wp-content\/uploads\/2026\/02\/Neuer-Export-SmartWOP-xml_en_300.png\" alt=\"\" width=\"300\" height=\"166\" \/><\/a><\/li>\n<\/ul>\n<\/div><\/div><\/div><\/section>\n<section class='av_toggle_section av-mkwq0l5o-d6006234bcc10111b8113802b7afff05'  itemscope=\"itemscope\" itemtype=\"https:\/\/schema.org\/CreativeWork\" ><div role=\"tablist\" class=\"single_toggle\" data-tags=\"{All} \"  ><p id='toggle-toggle-id-2' data-fake-id='#toggle-id-2' class='toggler  av-title-above '  itemprop=\"headline\"  role='tab' tabindex='0' aria-controls='toggle-id-2' data-slide-speed=\"200\" data-title=\"FlexiCAD version 4.2.0.0 - release date: 29.01.2026\" data-title-open=\"\" data-aria_collapsed=\"Click to expand: FlexiCAD version 4.2.0.0 - release date: 29.01.2026\" data-aria_expanded=\"Click to collapse: FlexiCAD version 4.2.0.0 - release date: 29.01.2026\">FlexiCAD version 4.2.0.0 - release date: 29.01.2026<span class=\"toggle_icon\"><span class=\"vert_icon\"><\/span><span class=\"hor_icon\"><\/span><\/span><\/p><div id='toggle-id-2' aria-labelledby='toggle-toggle-id-2' role='region' class='toggle_wrap  av-title-above'  ><div class='toggle_content invers-color '  itemprop=\"text\" ><p><strong>This comprehensive update focuses on expanding functionality, optimizing interoperability with other programs, and further improving stability and user-friendliness.<\/strong><\/p>\n<h3>Improved stability and reliability:<\/h3>\n<ul>\n<li><strong>2D projection, protection against geometry changes:<\/strong> If a 2D projection is performed on arcs or circles that have been moved to a non-parallel plane, the function is now <strong>disabled<\/strong> and a corresponding message is displayed in FlexiCAD to prevent unwanted geometry changes.<\/li>\n<li><strong>Copying elements (Ctrl+C \/ Ctrl+V), correct text alignment:<\/strong> The issue where copied text could appear rotated on a free layer has been fixed.<\/li>\n<li><strong>Display plane points, correct scaling of block symbol:<\/strong> The scaling of the block symbol for \u201cDisplay plane points\u201d has been corrected so that the display is now accurate even when working in units other than millimeters.<\/li>\n<li><strong>Calibrate self-defined room element, suitable measurement methods:<\/strong> The selection of calibration methods has been corrected so that only the methods <strong>suitable for the element<\/strong> are active.<\/li>\n<li><strong>Plumb CAD points, display message adjusted<\/strong>: The misleading message on the Flexijet display has been removed. Now, as usual, the next step (approaching the angle at a height of 30 mm) can be performed by triggering a measurement.<\/li>\n<\/ul>\n<hr \/>\n<h3>Enhanced functionality<\/h3>\n<h4>General operation and stability<\/h4>\n<ul>\n<li><strong>Opening larger files is no longer a problem:<\/strong> The internal process for opening FlexiCAD files has been revised so that files larger than <strong>800 MB<\/strong> can now be opened without any problems.<\/li>\n<li><strong>Drawing units, consistency guaranteed:<\/strong> When opening a drawing that was created in a different unit of measurement, the drawing is now <strong>automatically scaled to the unit of measurement currently set in FlexiCAD<\/strong>. This ensures that you always work in the correct unit of measurement.<\/li>\n<li><strong>Optimized repetition of the \u201cConnect Endpoints\u201d function for polylines:<\/strong>\n<ul>\n<li>After the confirmation prompt, the function now remains <strong>active<\/strong> when you click \u201cNo.\u201d This allows you to repeat the process immediately without restarting the function.<\/li>\n<li>The Notification Window is now positioned so that it <strong>does not cover the polyline<\/strong>, allowing you to see any changes at all times.<\/li>\n<\/ul>\n<\/li>\n<li><strong>Chamfering, faster working:<\/strong> The function can now be conveniently <strong>repeated by right-clicking in the drawing area<\/strong>.<\/li>\n<li><strong>License Manager, customizable contact person:<\/strong> Customers now have the option to customize the <strong>contact person in the License Manager<\/strong>.<\/li>\n<li><strong>Prevent negative wall thicknesses:<\/strong> Under the general settings for \u201c3D View,\u201d you can now prevent negative wall thicknesses from being entered.<\/li>\n<\/ul>\n<hr \/>\n<h3>Measurement and CAD functions<\/h3>\n<ul>\n<li><strong>Measure floorplan, automatic folder creation:<\/strong> If no project folder has been created yet, it will now be created automatically as soon as the \u201cMeasure floor plan\u201d function is started.<br \/>\n<a href=\"https:\/\/www.flexijet.info\/en\/wp-content\/uploads\/2026\/01\/Grundriss-vermessen-Automatische-Ordnererstellung_en.gif\"><img decoding=\"async\" class=\"alignnone wp-image-17032 size-full\" src=\"https:\/\/www.flexijet.info\/en\/wp-content\/uploads\/2026\/01\/Grundriss-vermessen-Automatische-Ordnererstellung_en_300.png\" alt=\"\" width=\"300\" height=\"161\" \/><\/a><\/li>\n<li><strong>Smarter approach to CAD points:<\/strong> The <strong>\u201cShow multiple CAD-points\/show multiple CAD-points perpendicular\u201d<\/strong> function has been improved and now always selects the point <strong>closest to the last point<\/strong>\u2014for a more efficient measurement process.<\/li>\n<li><strong>2D snap mode, clearer visualization:<\/strong> The icon for 2D snap mode now adapts and displays <strong>\u201c2D\u201d<\/strong> to better indicate activation.<br \/>\n<a href=\"https:\/\/www.flexijet.info\/en\/wp-content\/uploads\/2026\/01\/2D-Fangmodus-Deutlichere-Visualisierung_de.png\"><img decoding=\"async\" class=\"alignnone wp-image-17018 size-full\" src=\"https:\/\/www.flexijet.info\/en\/wp-content\/uploads\/2026\/01\/2D-Fangmodus-Deutlichere-Visualisierung_de_300.png\" alt=\"\" width=\"300\" height=\"121\" \/><\/a><\/li>\n<li><strong>Shower module:<\/strong> <strong>New help images and more flexible export<\/strong>\n<ul>\n<li><strong>Various help images<\/strong> have been added to schematically illustrate the input expectations.<\/li>\n<li>The export function in the \u201cShower\u201d tab now allows you to <strong>select the folder to be exported<\/strong>, which is very helpful for projects with multiple measured showers.<\/li>\n<\/ul>\n<\/li>\n<\/ul>\n<h3>Interoperability and export<\/h3>\n<ul>\n<li><strong>Export to Compass: Relative image paths<\/strong>\n<ul>\n<li>The path to the images is now specified as a <strong>relative path<\/strong> in the Compass XML. This simplifies opening the files, as the image folder no longer needs to be specified manually (Compass software should be kept up to date).<\/li>\n<li><strong>Crash-proof image imports (staircase measurements):<\/strong> To prevent the image import from crashing if an image is missing, a <strong>default image<\/strong> is now inserted. This allows all other images to be imported correctly and the import to be completed.<\/li>\n<\/ul>\n<\/li>\n<li><strong>Special characters in text, improved AutoCAD export:<\/strong> Texts ending with the ^ (circumflex) character, which could cause an error in AutoCAD, are now automatically appended with a <strong>space at the end<\/strong> during export.<\/li>\n<li><strong>3D DWG export, convert layer names to numbers:<\/strong> This function is now also available when exporting a 3D DWG.<br \/>\n<a href=\"https:\/\/www.flexijet.info\/en\/wp-content\/uploads\/2026\/01\/3D-DWG-export_en.png\"><img decoding=\"async\" class=\"alignnone wp-image-17044 size-full\" src=\"https:\/\/www.flexijet.info\/en\/wp-content\/uploads\/2026\/01\/3D-DWG-export_en_300.png\" alt=\"\" width=\"300\" height=\"366\" srcset=\"https:\/\/www.flexijet.info\/en\/wp-content\/uploads\/2026\/01\/3D-DWG-export_en_300.png 300w, https:\/\/www.flexijet.info\/en\/wp-content\/uploads\/2026\/01\/3D-DWG-export_en_300-246x300.png 246w\" sizes=\"(max-width: 300px) 100vw, 300px\" \/><\/a><\/li>\n<li><strong>English stair templates added:<\/strong> Stair templates for millimeter and inch settings have been added to the English templates.<\/li>\n<\/ul>\n<hr \/>\n<h3>New features<\/h3>\n<ul>\n<li><strong>Stair module, advanced step planning:<\/strong> A new feature is the option to enter a <strong>step height<\/strong> that is automatically deducted from the bottom edge of the riser. This makes it easier to create planning-relevant contours for risers.<\/li>\n<li><strong>Advanced color dialog: More export control<\/strong>\n<ul>\n<li>The color dialog now offers additional options for specifying the <strong>line type<\/strong><\/li>\n<li>A checkbox can be used to control whether objects should be included in the export (e.g., DWG\/PDF) or not for each color.<br \/>\n<a href=\"https:\/\/www.flexijet.info\/en\/wp-content\/uploads\/2026\/01\/Erweiterter-Farbendialog-Mehr-Exportkontrolle_en.png\"><img decoding=\"async\" class=\"alignnone wp-image-17036 size-full\" src=\"https:\/\/www.flexijet.info\/en\/wp-content\/uploads\/2026\/01\/Erweiterter-Farbendialog-Mehr-Exportkontrolle_en_300.png\" alt=\"\" width=\"300\" height=\"182\" \/><\/a><\/li>\n<\/ul>\n<\/li>\n<li><strong>Depth points as stamps for room elements:<\/strong> This function allows <strong>depth points for room elements<\/strong> to be inserted as stamps. This provides important additional information, especially when sharing PDF files.<br \/>\n<a href=\"https:\/\/www.flexijet.info\/en\/wp-content\/uploads\/2026\/01\/Distance-points-as-stamps-for-room-elements_en.png\"><img decoding=\"async\" class=\"alignnone wp-image-17047 size-full\" src=\"https:\/\/www.flexijet.info\/en\/wp-content\/uploads\/2026\/01\/Distance-points-as-stamps-for-room-elements_en_300.png\" alt=\"\" width=\"300\" height=\"292\" srcset=\"https:\/\/www.flexijet.info\/en\/wp-content\/uploads\/2026\/01\/Distance-points-as-stamps-for-room-elements_en_300.png 300w, https:\/\/www.flexijet.info\/en\/wp-content\/uploads\/2026\/01\/Distance-points-as-stamps-for-room-elements_en_300-36x36.png 36w\" sizes=\"(max-width: 300px) 100vw, 300px\" \/><\/a><\/li>\n<li><strong>Extended export to Staircon (.xml):<\/strong> The export has been extended to now also support arcs, circles, points, and element colors (requires FlexiCAD 4.2.0.0 and Staircon version 2025.1).<\/li>\n<li><strong>New export format Corpus (.xml):<\/strong> Exports an XML file for the Corpus software. A separate interface from Corpus is required.<\/li>\n<li><strong>New export format MegaTISCHLER (.xml):<\/strong> Exports an XML file for the MegaTISCHLER software. A current version of MegaTISCHLER is required.<\/li>\n<li><strong>New export format EGI (.egi):<\/strong> A new export format .egi has been added, which is mainly used for data transfer to kitchen programs. (Note: Elements such as niches, roller shutter belts, and heating are not usually imported via .egi; an additional dimensioned PDF transfer is recommended).<br \/>\n<a href=\"https:\/\/www.flexijet.info\/en\/wp-content\/uploads\/2026\/01\/Export_en.png\"><img decoding=\"async\" class=\"alignnone wp-image-17078 size-full\" src=\"https:\/\/www.flexijet.info\/en\/wp-content\/uploads\/2026\/01\/Export_en_300.png\" alt=\"\" width=\"300\" height=\"165\" \/><\/a><\/li>\n<\/ul>\n<p style=\"padding-left: 40px\">\n<\/div><\/div><\/div><\/section>\n<section class='av_toggle_section av-mg9fawrn-a846bd52632fd4f7830dc5f4a4113505'  itemscope=\"itemscope\" itemtype=\"https:\/\/schema.org\/CreativeWork\" ><div role=\"tablist\" class=\"single_toggle\" data-tags=\"{All} \"  ><p id='toggle-toggle-id-3' data-fake-id='#toggle-id-3' class='toggler  av-title-above '  itemprop=\"headline\"  role='tab' tabindex='0' aria-controls='toggle-id-3' data-slide-speed=\"200\" data-title=\"FlexiCAD version 4.0.5.0 \u2013 release date: 15.10.2025\" data-title-open=\"\" data-aria_collapsed=\"Click to expand: FlexiCAD version 4.0.5.0 \u2013 release date: 15.10.2025\" data-aria_expanded=\"Click to collapse: FlexiCAD version 4.0.5.0 \u2013 release date: 15.10.2025\">FlexiCAD version 4.0.5.0 \u2013 release date: 15.10.2025<span class=\"toggle_icon\"><span class=\"vert_icon\"><\/span><span class=\"hor_icon\"><\/span><\/span><\/p><div id='toggle-id-3' aria-labelledby='toggle-toggle-id-3' role='region' class='toggle_wrap  av-title-above'  ><div class='toggle_content invers-color '  itemprop=\"text\" ><h3><b>Stability and Reliability:<\/b><\/h3>\n<ul>\n<li><b>Improved:<\/b> The <b>Export function<\/b> now checks the integrity of room elements. If the room element <b>&#8220;Inswing Door&#8221;<\/b> is defined with an invalid negative value for the door leaf depth, a notification is displayed, and the value is automatically set to <b>0<\/b> to ensure error-free exports.<br \/>\n<a href=\"https:\/\/www.flexijet.info\/en\/wp-content\/uploads\/2025\/10\/Turblatt-Tiefe-darf-nicht-negativ-sein_EN.jpg\"><img decoding=\"async\" class=\"alignnone wp-image-16784 size-full\" src=\"https:\/\/www.flexijet.info\/en\/wp-content\/uploads\/2025\/10\/Turblatt-Tiefe-darf-nicht-negativ-sein_300_EN.jpg\" alt=\"\" width=\"300\" height=\"118\" \/><\/a><\/li>\n<li><b>Improved:<\/b> When calling the function <b>&#8220;Export, Select Objects&#8230;&#8221;<\/b>, the <b>correct export dialog<\/b> is now reliably displayed, making the export process clearer and more efficient.<\/li>\n<li><b>Improved:<\/b> For the <b>&#8220;Options for Auto Diemensions&#8221;<\/b> function, a <b>default dimensioning style<\/b> has been set for angle and radial dimensions. This ensures that <b>two decimal places<\/b> are correctly displayed for angle dimensions, even if no specific style was previously selected.<br \/>\n<a href=\"https:\/\/www.flexijet.info\/en\/wp-content\/uploads\/2025\/10\/Optionen-fur-automatische-Bemasung-Standardstil_EN.jpg\"><img decoding=\"async\" class=\"alignnone wp-image-16786 size-full\" src=\"https:\/\/www.flexijet.info\/en\/wp-content\/uploads\/2025\/10\/Optionen-fur-automatische-Bemasung-Standardstil_300_EN.jpg\" alt=\"\" width=\"300\" height=\"417\" srcset=\"https:\/\/www.flexijet.info\/en\/wp-content\/uploads\/2025\/10\/Optionen-fur-automatische-Bemasung-Standardstil_300_EN.jpg 300w, https:\/\/www.flexijet.info\/en\/wp-content\/uploads\/2025\/10\/Optionen-fur-automatische-Bemasung-Standardstil_300_EN-216x300.jpg 216w\" sizes=\"(max-width: 300px) 100vw, 300px\" \/><\/a><\/li>\n<li><b>Improved:<\/b> The setting <b>&#8220;Convert Areas to Hatching&#8221;<\/b> in the export dialog now remembers your last choice. The checkbox is no longer automatically active for every export, saving you time and allowing for <b>more consistent use<\/b> of the export functions.<br \/>\n<a href=\"https:\/\/www.flexijet.info\/en\/wp-content\/uploads\/2025\/10\/Export-Dialog-Flache-in-Schraffur-umwandeln_EN.jpg\"><img decoding=\"async\" class=\"alignnone wp-image-16788 size-full\" src=\"https:\/\/www.flexijet.info\/en\/wp-content\/uploads\/2025\/10\/Export-Dialog-Flache-in-Schraffur-umwandeln_300_EN.jpg\" alt=\"\" width=\"300\" height=\"356\" srcset=\"https:\/\/www.flexijet.info\/en\/wp-content\/uploads\/2025\/10\/Export-Dialog-Flache-in-Schraffur-umwandeln_300_EN.jpg 300w, https:\/\/www.flexijet.info\/en\/wp-content\/uploads\/2025\/10\/Export-Dialog-Flache-in-Schraffur-umwandeln_300_EN-253x300.jpg 253w\" sizes=\"(max-width: 300px) 100vw, 300px\" \/><\/a><\/li>\n<\/ul>\n<\/div><\/div><\/div><\/section>\n<section class='av_toggle_section av-mesdmvcg-32590a68d7ae002c22a2b60ca8ccbf46'  itemscope=\"itemscope\" itemtype=\"https:\/\/schema.org\/CreativeWork\" ><div role=\"tablist\" class=\"single_toggle\" data-tags=\"{All} \"  ><p id='toggle-toggle-id-4' data-fake-id='#toggle-id-4' class='toggler  av-title-above '  itemprop=\"headline\"  role='tab' tabindex='0' aria-controls='toggle-id-4' data-slide-speed=\"200\" data-title=\"FlexiCAD version 4.0.4.1 \u2013 release date: 03.09.2025\" data-title-open=\"\" data-aria_collapsed=\"Click to expand: FlexiCAD version 4.0.4.1 \u2013 release date: 03.09.2025\" data-aria_expanded=\"Click to collapse: FlexiCAD version 4.0.4.1 \u2013 release date: 03.09.2025\">FlexiCAD version 4.0.4.1 \u2013 release date: 03.09.2025<span class=\"toggle_icon\"><span class=\"vert_icon\"><\/span><span class=\"hor_icon\"><\/span><\/span><\/p><div id='toggle-id-4' aria-labelledby='toggle-toggle-id-4' role='region' class='toggle_wrap  av-title-above'  ><div class='toggle_content invers-color '  itemprop=\"text\" ><h3><b>Stability and Reliability:<\/b><\/h3>\n<ul>\n<li><b>Staircon Export:<\/b> The scaling issue that occurred during Staircon exports when FlexiCAD was set to inches has been resolved.<\/li>\n<li><b>Layer Names:<\/b> A bug where layer names for dimensions and text were ignored during export and replaced with numbers has been fixed.<\/li>\n<li><b>OTF Fonts:<\/b> OTF fonts have been removed from the list of text styles as they are not supported in FlexiCAD.<\/li>\n<li><b>Digitize Hatch:<\/b> A bug that allowed parallel actions to be performed during the <b>&#8220;Digitize Hatch&#8221;<\/b> function has been fixed to prevent unintended behavior and crashes.<\/li>\n<\/ul>\n<h4>Flexijet Smart Remote<\/h4>\n<ul>\n<li>A bug has been fixed that could prevent more than one audio note from being recorded.<\/li>\n<li>Resume location is now supported on the Flexijet Smart Remote.<\/li>\n<\/ul>\n<hr \/>\n<h3>Enhanced Functionality<\/h3>\n<ul>\n<li><b>Resume Location:<\/b> When the <b>&#8220;Resume Location&#8221;<\/b> function is selected on the Flexijet display and no location points exist yet, a corresponding message is now shown.<\/li>\n<li><b>Series of Measurement Along Path:<\/b> The function has been adjusted. The entered distance (e.g., 150 mm) is now considered the <b>maximum distance<\/b>. FlexiCAD automatically adjusts the distance to ensure the path&#8217;s endpoints are accurately reached.<\/li>\n<li><b>Battery Capacity:<\/b> A warning message is now displayed when the Flexijet&#8217;s battery capacity reaches 15% and 5%.<\/li>\n<\/ul>\n<hr \/>\n<h3>New Features<\/h3>\n<ul>\n<li><b>Scribe Tabs:<\/b> This function allows you to create a notch, for example, on the wall side of a countertop. This allows the plate to be manufactured with fewer cuts.<br \/>\n<a href=\"https:\/\/www.flexijet.info\/en\/wp-content\/uploads\/2025\/08\/Ausklinkung-Wandverlauf_EN.gif\"><img decoding=\"async\" class=\"alignnone wp-image-16679 size-full\" src=\"https:\/\/www.flexijet.info\/en\/wp-content\/uploads\/2025\/08\/Ausklingung-Wandverlauf_300.jpg\" alt=\"\" width=\"300\" height=\"112\" \/><\/a><br \/>\nMore information here: <strong><span style=\"color: #0000ff\"><a style=\"color: #0000ff\" href=\"https:\/\/www.manula.com\/manuals\/flexijet\/flexijet-stone\/4\/en\/topic\/scribe-tabs?q=scribe\" target=\"_blank\" rel=\"noopener\">Manual &#8220;Scribe Tabs&#8221;<\/a><\/span><\/strong><\/li>\n<li><b>Options for auto dimensions:<\/b> This new function allows for the flexible configuration of automatic dimensioning.<br \/>\n<a href=\"https:\/\/www.flexijet.info\/en\/wp-content\/uploads\/2025\/08\/Optionen-fur-automatische-Bemassung_Ribbon_EN.jpg\"><img decoding=\"async\" class=\"alignnone wp-image-16695 size-full\" src=\"https:\/\/www.flexijet.info\/en\/wp-content\/uploads\/2025\/08\/Optionen-fur-automatische-Bemassung_Ribbon_EN_300.jpg\" alt=\"\" width=\"300\" height=\"103\" \/><\/a><br \/>\n<a href=\"https:\/\/www.flexijet.info\/en\/wp-content\/uploads\/2025\/08\/Optionen-fur-automatische-Bemassung_Optionen-Dialog_EN.jpg\"><img decoding=\"async\" class=\"alignnone wp-image-16694 size-full\" src=\"https:\/\/www.flexijet.info\/en\/wp-content\/uploads\/2025\/08\/Optionen-fur-automatische-Bemassung_Optionen-Dialog_EN_300.jpg\" alt=\"\" width=\"300\" height=\"416\" srcset=\"https:\/\/www.flexijet.info\/en\/wp-content\/uploads\/2025\/08\/Optionen-fur-automatische-Bemassung_Optionen-Dialog_EN_300.jpg 300w, https:\/\/www.flexijet.info\/en\/wp-content\/uploads\/2025\/08\/Optionen-fur-automatische-Bemassung_Optionen-Dialog_EN_300-216x300.jpg 216w\" sizes=\"(max-width: 300px) 100vw, 300px\" \/><\/a><br \/>\nMore information here:\u00a0<strong><span style=\"color: #0000ff\"><a style=\"color: #0000ff\" href=\"https:\/\/www.manula.com\/manuals\/flexijet\/flexijet-stone\/4\/en\/topic\/auto-dimension\" target=\"_blank\" rel=\"noopener\">Manual &#8220;Auto-Dimension&#8221;<\/a><\/span><\/strong><\/li>\n<li><b>Project Elements Perpendicular to a Plane:<\/b> Project elements exactly perpendicular to a selected plane.<\/li>\n<li><b>Offset and Delete:<\/b> This function creates a parallel copy of an object and deletes the original in a single step.<br \/>\n<a href=\"https:\/\/www.flexijet.info\/en\/wp-content\/uploads\/2025\/08\/Versetzen-und-loschen_EN.jpg\"><img decoding=\"async\" class=\"alignnone wp-image-16697 size-full\" src=\"https:\/\/www.flexijet.info\/en\/wp-content\/uploads\/2025\/08\/Versetzen-und-loschen_EN_300.jpg\" alt=\"\" width=\"300\" height=\"121\" \/><\/a><\/li>\n<li><b>Text\/Label Function:<\/b> When creating text or labels, you can now directly specify a rotation angle.<br \/>\n<a href=\"https:\/\/www.flexijet.info\/en\/wp-content\/uploads\/2025\/08\/Text_Rotation_Ribbon_EN.jpg\"><img decoding=\"async\" class=\"alignnone wp-image-16703 size-full\" src=\"https:\/\/www.flexijet.info\/en\/wp-content\/uploads\/2025\/08\/Text_Rotation_Ribbon_EN_300.jpg\" alt=\"\" width=\"300\" height=\"67\" \/><\/a><br \/>\n<img decoding=\"async\" class=\"alignnone wp-image-16699\" src=\"https:\/\/www.flexijet.info\/en\/wp-content\/uploads\/2025\/08\/Text_Rotation_Context_EN.jpg\" alt=\"\" width=\"300\" height=\"318\" \/><br \/>\n<a href=\"https:\/\/www.flexijet.info\/en\/wp-content\/uploads\/2025\/08\/Text_Rotation_Dialog_EN.pg_.jpg\"><img decoding=\"async\" class=\"alignnone wp-image-16701 size-full\" src=\"https:\/\/www.flexijet.info\/en\/wp-content\/uploads\/2025\/08\/Text_Rotation_Dialog_EN_300.jpg\" alt=\"\" width=\"300\" height=\"165\" \/><\/a><\/li>\n<li><b>Seam:<\/b> In the general settings, you can now specify whether a distance should be prompted for the automatic separation of cut edges.<br \/>\n<a href=\"https:\/\/www.flexijet.info\/en\/wp-content\/uploads\/2025\/08\/Schnittkante-Abstand-abfragen_EN.jpg\"><img decoding=\"async\" class=\"alignnone wp-image-16705 size-full\" src=\"https:\/\/www.flexijet.info\/en\/wp-content\/uploads\/2025\/08\/Schnittkante-Abstand-abfragen_EN_300.jpg\" alt=\"\" width=\"300\" height=\"293\" srcset=\"https:\/\/www.flexijet.info\/en\/wp-content\/uploads\/2025\/08\/Schnittkante-Abstand-abfragen_EN_300.jpg 300w, https:\/\/www.flexijet.info\/en\/wp-content\/uploads\/2025\/08\/Schnittkante-Abstand-abfragen_EN_300-36x36.jpg 36w\" sizes=\"(max-width: 300px) 100vw, 300px\" \/><\/a><\/li>\n<li><b>TrunCAD Export:<\/b> A new export for the <b>TrunCAD<\/b> software is available. It exports only the floor created with the <b>&#8220;Measure Floor Plan&#8221;<\/b> function, which eliminates the need for manual adjustments in FlexiCAD. [Placeholder for image from export menu]<\/li>\n<li><b>IN-CAD Export:<\/b> This export does not just create a classic 3D DWG file. Additionally, an XML file with image coordinates and the corresponding images are saved in a &#8220;project folder.&#8221; In IN-CAD, this folder can be loaded via a special Flexijet import, making the 3D model and all images taken by the Flexijet directly available. [Placeholder for image from export menu]<\/li>\n<\/ul>\n<hr \/>\n<h3>New Module: Shower<\/h3>\n<p><a href=\"https:\/\/www.flexijet.info\/en\/wp-content\/uploads\/2025\/08\/Dusche_Ribbon_EN.jpg\"><img decoding=\"async\" class=\"alignnone wp-image-16713 size-full\" src=\"https:\/\/www.flexijet.info\/en\/wp-content\/uploads\/2025\/08\/Dusche_Ribbon_300_EN.jpg\" alt=\"\" width=\"300\" height=\"62\" \/><\/a><\/p>\n<p>This module makes it possible to quickly and easily capture the relevant contours for a glass shower.<\/p>\n<ul>\n<li><b>Automatic Offset:<\/b> Offset dimensions can be automatically inserted to create an offset from the measured contour.<\/li>\n<li><b>Line Straightening:<\/b> If an edge or wall is measured with multiple points (polyline), the module automatically creates a straight line that represents the largest possible dimension.<\/li>\n<li><b>Export Options:<\/b>\n<ul>\n<li>When exporting via the new <b>&#8220;Shower&#8221;<\/b> ribbon, only the straightened lines are exported. This is ideal for transferring data to the <b>Smart Glazier<\/b> software.<\/li>\n<li>If you also want to export the original lines, you can still use the classic export via the <b>&#8220;F3D &gt; Export&#8230;&#8221;<\/b> menu.<\/li>\n<\/ul>\n<\/li>\n<\/ul>\n<p>More information here:\u00a0<strong><a href=\"https:\/\/www.manula.com\/manuals\/flexijet\/flexijet-3d-flexicad-flexjiet-stone\/4\/en\/topic\/shower\" target=\"_blank\" rel=\"noopener\">Manual &#8220;Shower&#8221;<\/a><\/strong><\/p>\n<\/div><\/div><\/div><\/section>\n<section class='av_toggle_section av-ma0ojam6-92148aefd7909e79743407476b3ab608'  itemscope=\"itemscope\" itemtype=\"https:\/\/schema.org\/CreativeWork\" ><div role=\"tablist\" class=\"single_toggle\" data-tags=\"{All} \"  ><p id='toggle-toggle-id-5' data-fake-id='#toggle-id-5' class='toggler  av-title-above '  itemprop=\"headline\"  role='tab' tabindex='0' aria-controls='toggle-id-5' data-slide-speed=\"200\" data-title=\"FlexiCAD version 4.0.3.0 \u2013 release date: 29.04.2025\" data-title-open=\"\" data-aria_collapsed=\"Click to expand: FlexiCAD version 4.0.3.0 \u2013 release date: 29.04.2025\" data-aria_expanded=\"Click to collapse: FlexiCAD version 4.0.3.0 \u2013 release date: 29.04.2025\">FlexiCAD version 4.0.3.0 \u2013 release date: 29.04.2025<span class=\"toggle_icon\"><span class=\"vert_icon\"><\/span><span class=\"hor_icon\"><\/span><\/span><\/p><div id='toggle-id-5' aria-labelledby='toggle-toggle-id-5' role='region' class='toggle_wrap  av-title-above'  ><div class='toggle_content invers-color '  itemprop=\"text\" ><p data-sourcepos=\"3:1-3:39\"><strong>Improved Stability and Reliability:<\/strong><\/p>\n<ul data-sourcepos=\"5:1-15:0\">\n<li data-sourcepos=\"5:1-8:0\">\n<p data-sourcepos=\"5:3-5:26\"><strong>Improved 3D Display:<\/strong><\/p>\n<ul data-sourcepos=\"6:5-8:0\">\n<li data-sourcepos=\"6:5-6:277\"><strong>Optimized 3D Display:<\/strong> Objects without a defined type and with a negative object height are now always displayed correctly in the 3D view. This ensures clear and reliable visual control of your projects. (This was a display issue only; data export was always correct).<\/li>\n<li data-sourcepos=\"7:5-8:0\"><strong>More Consistent 3D View:<\/strong> Floor and Ceiling are now always displayed in the 3D view, regardless of export settings. Their visibility can still be conveniently controlled using the familiar buttons.<\/li>\n<li data-sourcepos=\"7:5-8:0\"><a href=\"https:\/\/www.flexijet.info\/en\/wp-content\/uploads\/2025\/04\/Boden-und-Decke-in-3D-Ansicht-ausblenden-EN.gif\"><img decoding=\"async\" class=\"alignnone wp-image-16331 size-full\" src=\"https:\/\/www.flexijet.info\/en\/wp-content\/uploads\/2025\/04\/Boden-und-Decke-in-3D-Ansicht-ausblenden.jpg\" alt=\"\" width=\"333\" height=\"186\" srcset=\"https:\/\/www.flexijet.info\/en\/wp-content\/uploads\/2025\/04\/Boden-und-Decke-in-3D-Ansicht-ausblenden.jpg 333w, https:\/\/www.flexijet.info\/en\/wp-content\/uploads\/2025\/04\/Boden-und-Decke-in-3D-Ansicht-ausblenden-300x168.jpg 300w\" sizes=\"(max-width: 333px) 100vw, 333px\" \/><\/a><\/li>\n<\/ul>\n<\/li>\n<li data-sourcepos=\"9:1-15:0\">\n<p data-sourcepos=\"9:3-9:26\"><strong>More Reliable Tools:<\/strong><\/p>\n<ul data-sourcepos=\"10:5-15:0\">\n<li data-sourcepos=\"10:5-10:142\"><strong>More Reliable Seam-Tool:<\/strong> The &#8216;Seam&#8217; function now works more precisely and processes diagonal objects as expected.<\/li>\n<li data-sourcepos=\"11:5-11:220\"><strong>More Robust 3D Object Creation:<\/strong> You can now create 3D objects from polylines more smoothly! The function is more fault-tolerant and automatically cleans up inaccuracies like duplicate points (segment length 0).<\/li>\n<li data-sourcepos=\"12:5-12:227\"><strong>Correct Display in Digitze Hatch:<\/strong> The spatial distribution of measurement points from the &#8216;Digitize Hatch&#8217; function is now displayed precisely and correctly again in the plan view (Improvement compared to version 4.0.2.0).<\/li>\n<li data-sourcepos=\"13:5-13:165\"><strong>Automatic Dimensioning:<\/strong> For complete dimensioning, the &#8216;Floor&#8217; folder is now correctly considered again by the automatic dimensioning function as intended.<\/li>\n<li data-sourcepos=\"14:5-15:0\"><strong>More Convenient Calculator Usage:<\/strong> The integrated calculator remembers your inputs better! Values confirmed with the &#8216;Enter&#8217; key now reliably appear in the history of recently used values.<\/li>\n<\/ul>\n<\/li>\n<\/ul>\n<p data-sourcepos=\"16:1-16:27\"><strong>Enhanced Functionality:<\/strong><\/p>\n<ul data-sourcepos=\"18:1-24:144\">\n<li data-sourcepos=\"18:1-21:0\">\n<p data-sourcepos=\"18:3-18:36\"><strong>Enhanced Total Station Interface:<\/strong><\/p>\n<ul data-sourcepos=\"19:5-21:0\">\n<li data-sourcepos=\"19:5-19:93\">With an active Total Station connection, the Flexijet symbol is now displayed in FlexiCAD.<\/li>\n<li data-sourcepos=\"20:5-21:0\">After a measurement, a red laser line in the drawing visualizes the last measured point. This significantly facilitates orientation.<\/li>\n<li data-sourcepos=\"20:5-21:0\"><a href=\"https:\/\/www.flexijet.info\/en\/wp-content\/uploads\/2025\/04\/Tachymeter-letzter-gemessener-Punkt-Vorschau.jpg\"><img decoding=\"async\" class=\"alignnone wp-image-16338 size-full\" src=\"https:\/\/www.flexijet.info\/en\/wp-content\/uploads\/2025\/04\/Tachymeter-letzter-gemessener-Punkt-Vorschau-333.jpg\" alt=\"\" width=\"333\" height=\"277\" srcset=\"https:\/\/www.flexijet.info\/en\/wp-content\/uploads\/2025\/04\/Tachymeter-letzter-gemessener-Punkt-Vorschau-333.jpg 333w, https:\/\/www.flexijet.info\/en\/wp-content\/uploads\/2025\/04\/Tachymeter-letzter-gemessener-Punkt-Vorschau-333-300x250.jpg 300w\" sizes=\"(max-width: 333px) 100vw, 333px\" \/><\/a><\/li>\n<\/ul>\n<\/li>\n<li data-sourcepos=\"22:1-24:144\">\n<p data-sourcepos=\"22:3-22:47\"><strong>Important: Default for Simplify Polyline:<\/strong><\/p>\n<ul data-sourcepos=\"23:5-24:144\">\n<li data-sourcepos=\"23:5-23:110\">The default tolerance has been reduced from 9\u00b0 to 0.2\u00b0 to achieve higher accuracy during simplification.<\/li>\n<li data-sourcepos=\"24:5-24:144\"><strong>Note:<\/strong> Please check this setting under &#8216;General Settings&#8217; &gt; &#8216;CAD Settings&#8217; in FlexiCAD and adjust it to your requirements if necessary.<\/li>\n<li data-sourcepos=\"24:5-24:144\"><a href=\"https:\/\/www.flexijet.info\/en\/wp-content\/uploads\/2025\/04\/Toleranz-Polylinie-vereinfachen-EN.jpg\"><img decoding=\"async\" class=\"alignnone wp-image-16334 size-full\" src=\"https:\/\/www.flexijet.info\/en\/wp-content\/uploads\/2025\/04\/Toleranz-Polylinie-vereinfachen-EN-333.jpg\" alt=\"\" width=\"333\" height=\"325\" srcset=\"https:\/\/www.flexijet.info\/en\/wp-content\/uploads\/2025\/04\/Toleranz-Polylinie-vereinfachen-EN-333.jpg 333w, https:\/\/www.flexijet.info\/en\/wp-content\/uploads\/2025\/04\/Toleranz-Polylinie-vereinfachen-EN-333-300x293.jpg 300w, https:\/\/www.flexijet.info\/en\/wp-content\/uploads\/2025\/04\/Toleranz-Polylinie-vereinfachen-EN-333-36x36.jpg 36w\" sizes=\"(max-width: 333px) 100vw, 333px\" \/><\/a><\/li>\n<\/ul>\n<\/li>\n<\/ul>\n<\/div><\/div><\/div><\/section>\n<section class='av_toggle_section av-m8hecddt-b33c282cb5a95a05f8cd92653407e9a6'  itemscope=\"itemscope\" itemtype=\"https:\/\/schema.org\/CreativeWork\" ><div role=\"tablist\" class=\"single_toggle\" data-tags=\"{All} \"  ><p id='toggle-toggle-id-6' data-fake-id='#toggle-id-6' class='toggler  av-title-above '  itemprop=\"headline\"  role='tab' tabindex='0' aria-controls='toggle-id-6' data-slide-speed=\"200\" data-title=\"FlexiCAD version 4.0.2.0 \u2013 release date: 01.04.2025\" data-title-open=\"\" data-aria_collapsed=\"Click to expand: FlexiCAD version 4.0.2.0 \u2013 release date: 01.04.2025\" data-aria_expanded=\"Click to collapse: FlexiCAD version 4.0.2.0 \u2013 release date: 01.04.2025\">FlexiCAD version 4.0.2.0 \u2013 release date: 01.04.2025<span class=\"toggle_icon\"><span class=\"vert_icon\"><\/span><span class=\"hor_icon\"><\/span><\/span><\/p><div id='toggle-id-6' aria-labelledby='toggle-toggle-id-6' role='region' class='toggle_wrap  av-title-above'  ><div class='toggle_content invers-color '  itemprop=\"text\" ><p>English<\/p>\n<p><span data-contrast=\"auto\">Bugfixes:<\/span><span data-ccp-props=\"{}\">\u00a0<\/span><\/p>\n<ul>\n<li data-leveltext=\"-\" data-font=\"Aptos\" data-listid=\"1\" data-list-defn-props=\"{\" data-aria-posinset=\"36\" data-aria-level=\"1\"><span data-contrast=\"auto\">The PDF tool now correctly displays title block elements with color 7(black\/white), even if the background is black.<\/span><span data-ccp-props=\"{}\">\u00a0<\/span><\/li>\n<\/ul>\n<ul>\n<li data-leveltext=\"-\" data-font=\"Aptos\" data-listid=\"1\" data-list-defn-props=\"{\" data-aria-posinset=\"37\" data-aria-level=\"1\"><span data-contrast=\"auto\">The PDF tool now outputs scaled blocks (installation symbols) correctly.\u00a0<\/span><span data-ccp-props=\"{}\">\u00a0<\/span><\/li>\n<\/ul>\n<ul>\n<li data-leveltext=\"-\" data-font=\"Aptos\" data-listid=\"1\" data-list-defn-props=\"{\" data-aria-posinset=\"38\" data-aria-level=\"1\"><span data-contrast=\"auto\">The <\/span><span data-contrast=\"auto\">\u2018<\/span><span data-contrast=\"auto\">Round<\/span><span data-contrast=\"auto\">\u2019<\/span><span data-contrast=\"auto\"> tool now works correctly with polylines.<\/span><span data-ccp-props=\"{}\">\u00a0<\/span><\/li>\n<\/ul>\n<ul>\n<li data-leveltext=\"-\" data-font=\"Aptos\" data-listid=\"1\" data-list-defn-props=\"{\" data-aria-posinset=\"39\" data-aria-level=\"1\"><span data-contrast=\"auto\">Stamp values are now displayed correctly with <\/span><span data-contrast=\"auto\">\u2018Digitize Hatch\u2019<\/span><span data-contrast=\"auto\">. In some cases, the values were inverted.\u00a0<\/span><span data-ccp-props=\"{}\">\u00a0<\/span><\/li>\n<\/ul>\n<ul>\n<li data-leveltext=\"-\" data-font=\"Aptos\" data-listid=\"1\" data-list-defn-props=\"{\" data-aria-posinset=\"40\" data-aria-level=\"1\"><span data-contrast=\"auto\">\u2018Show <\/span><span data-contrast=\"auto\">CAD<\/span><span data-contrast=\"auto\">&#8211;<\/span><span data-contrast=\"auto\">points<\/span><span data-contrast=\"auto\">\u2019<\/span><span data-contrast=\"auto\"> from the drawing is now correctly aborted if the process is interrupted by the user.<\/span><span data-ccp-props=\"{}\">\u00a0<\/span><\/li>\n<\/ul>\n<ul>\n<li data-leveltext=\"-\" data-font=\"Aptos\" data-listid=\"1\" data-list-defn-props=\"{\" data-aria-posinset=\"41\" data-aria-level=\"1\"><span data-contrast=\"auto\">The import process <\/span><span data-contrast=\"auto\">using \u2018F<\/span><span data-contrast=\"auto\">ile &gt; Import<\/span><span data-contrast=\"auto\">\u2019<\/span><span data-contrast=\"auto\"> is no longer canceled when the user presses &#8220;Enter&#8221; in PC mode with calculator input.<\/span><span data-ccp-props=\"{}\">\u00a0<\/span><\/li>\n<\/ul>\n<ul>\n<li data-leveltext=\"-\" data-font=\"Aptos\" data-listid=\"1\" data-list-defn-props=\"{\" data-aria-posinset=\"42\" data-aria-level=\"1\"><span data-contrast=\"auto\">The File Explorer <\/span><span data-contrast=\"auto\">when using <\/span><span data-contrast=\"auto\">&#8220;Import&#8221; or &#8220;Import Drop-in&#8221; no longer displays the contents of ZIP folders that cannot be opened<\/span><span data-contrast=\"auto\"> \u2013 only files which can be opened are displayed<\/span><span data-contrast=\"auto\">.<\/span><span data-ccp-props=\"{}\">\u00a0<\/span><\/li>\n<\/ul>\n<ul>\n<li data-leveltext=\"-\" data-font=\"Aptos\" data-listid=\"1\" data-list-defn-props=\"{\" data-aria-posinset=\"43\" data-aria-level=\"1\"><span data-contrast=\"auto\">When measuring vertically (hand laser) with a base point <\/span><span data-contrast=\"auto\">only<\/span><span data-contrast=\"auto\">(without distance measurement), points are now correctly projected onto the active plane.<\/span><span data-ccp-props=\"{}\">\u00a0<\/span><\/li>\n<\/ul>\n<ul>\n<li data-leveltext=\"-\" data-font=\"Aptos\" data-listid=\"1\" data-list-defn-props=\"{\" data-aria-posinset=\"44\" data-aria-level=\"1\"><span data-contrast=\"auto\">When measuring vertically with a handheld laser, the automatic zoom is now only performed after the vertical line has been drawn.<\/span><span data-ccp-props=\"{}\">\u00a0<\/span><\/li>\n<\/ul>\n<ul>\n<li data-leveltext=\"-\" data-font=\"Aptos\" data-listid=\"1\" data-list-defn-props=\"{\" data-aria-posinset=\"45\" data-aria-level=\"1\"><span data-contrast=\"auto\">With <\/span><span data-contrast=\"auto\">\u2018Show Multiple <\/span><span data-contrast=\"auto\">CAD<\/span><span data-contrast=\"auto\">&#8211;<\/span><span data-contrast=\"auto\">points <\/span><span data-contrast=\"auto\">(P<\/span><span data-contrast=\"auto\">erpendicular<\/span><span data-contrast=\"auto\">)\u2019<\/span><span data-contrast=\"auto\">, the <\/span><span data-contrast=\"auto\">pause time <\/span><span data-contrast=\"auto\">can now also be skipped on the Flexijet <\/span><span data-contrast=\"auto\">3D 2 <\/span><span data-contrast=\"auto\">or <\/span><span data-contrast=\"auto\">on <\/span><span data-contrast=\"auto\">the <\/span><span data-contrast=\"auto\">Flexijet <\/span><span data-contrast=\"auto\">Smart Remote app.<\/span><span data-ccp-props=\"{}\">\u00a0<\/span><\/li>\n<\/ul>\n<ul>\n<li data-leveltext=\"-\" data-font=\"Aptos\" data-listid=\"1\" data-list-defn-props=\"{\" data-aria-posinset=\"46\" data-aria-level=\"1\"><span data-contrast=\"auto\">The on-screen keyboard no longer closes after each letter in the text field<\/span><span data-contrast=\"auto\">s<\/span><span data-contrast=\"auto\"> of <\/span><span data-contrast=\"auto\">\u2018Draw a Sink or Cutout\u2019<\/span><span data-contrast=\"auto\"> in touch mode.<\/span><span data-ccp-props=\"{}\">\u00a0<\/span><\/li>\n<\/ul>\n<ul>\n<li data-leveltext=\"-\" data-font=\"Aptos\" data-listid=\"1\" data-list-defn-props=\"{\" data-aria-posinset=\"47\" data-aria-level=\"1\"><span data-contrast=\"auto\">Trimming <\/span><span data-contrast=\"auto\">a line segment that is too short no longer deletes the line completely.<\/span><span data-ccp-props=\"{}\">\u00a0<\/span><\/li>\n<\/ul>\n<ul>\n<li data-leveltext=\"-\" data-font=\"Aptos\" data-listid=\"1\" data-list-defn-props=\"{\" data-aria-posinset=\"48\" data-aria-level=\"1\"><span data-contrast=\"auto\">The <\/span><span data-contrast=\"auto\">umlauts symbol is now correctly displayed <\/span><span data-contrast=\"auto\">in PDFs.<\/span><span data-ccp-props=\"{}\">\u00a0<\/span><\/li>\n<\/ul>\n<ul>\n<li data-leveltext=\"-\" data-font=\"Aptos\" data-listid=\"1\" data-list-defn-props=\"{\" data-aria-posinset=\"49\" data-aria-level=\"1\"><span data-contrast=\"auto\">Fixed issue where the laser module <\/span><span data-contrast=\"auto\">could<\/span><span data-contrast=\"auto\"> shut down unexpectedly and require a restart of the Flexijet.<\/span><span data-ccp-props=\"{}\">\u00a0<\/span><\/li>\n<\/ul>\n<ul>\n<li data-leveltext=\"-\" data-font=\"Aptos\" data-listid=\"1\" data-list-defn-props=\"{\" data-aria-posinset=\"50\" data-aria-level=\"1\"><span data-contrast=\"auto\">After assigning an object height, the drawing is now automatically regenerated to reflect the changes.<\/span><span data-ccp-props=\"{}\">\u00a0<\/span><\/li>\n<\/ul>\n<ul>\n<li data-leveltext=\"-\" data-font=\"Aptos\" data-listid=\"1\" data-list-defn-props=\"{\" data-aria-posinset=\"51\" data-aria-level=\"1\"><span data-contrast=\"auto\">The warning during the Compass export is now displayed correctly.<\/span><span data-ccp-props=\"{}\">\u00a0<\/span><\/li>\n<\/ul>\n<ul>\n<li data-leveltext=\"-\" data-font=\"Aptos\" data-listid=\"1\" data-list-defn-props=\"{\" data-aria-posinset=\"52\" data-aria-level=\"1\"><span data-contrast=\"auto\">Fixed an issue where measurement coordinates and mouse click points were not accepted during an auto-save operation.<\/span><span data-ccp-props=\"{}\">\u00a0<\/span><\/li>\n<\/ul>\n<ul>\n<li data-leveltext=\"-\" data-font=\"Aptos\" data-listid=\"1\" data-list-defn-props=\"{\" data-aria-posinset=\"53\" data-aria-level=\"1\"><span data-contrast=\"auto\">FlexijetStone: The Wall function now correctly defines the layer, even if <\/span><span data-contrast=\"auto\">\u2018Align to Object\u2019 <\/span><span data-contrast=\"auto\">was previously used.\u00a0<\/span><span data-ccp-props=\"{}\">\u00a0<\/span><\/li>\n<\/ul>\n<p><span data-contrast=\"auto\">Improvement<\/span><span data-contrast=\"auto\">s<\/span><span data-contrast=\"auto\">:<\/span><span data-ccp-props=\"{}\">\u00a0<\/span><\/p>\n<ul>\n<li data-leveltext=\"-\" data-font=\"Aptos\" data-listid=\"1\" data-list-defn-props=\"{\" data-aria-posinset=\"54\" data-aria-level=\"1\"><span data-contrast=\"auto\">The \u2018About Flexi<\/span><span data-contrast=\"auto\">CAD<\/span><span data-contrast=\"auto\">\u2019 dialog now shows the <\/span><span data-contrast=\"auto\">next recommended service date<\/span><span data-contrast=\"auto\">, providing a quick and easy overview of your system&#8217;s maintenance needs.<\/span><br \/>\n<span data-contrast=\"auto\">In addition, the \u2018About FlexiCAD&#8217; dialog now includes the contact information of your contact person, so you can get help quickly and easily<\/span><span data-ccp-props=\"{}\">\u00a0<\/span><span data-ccp-props=\"{}\"> <a href=\"https:\/\/www.flexijet.info\/wp-content\/uploads\/2025\/03\/About-Flexicad-Window-1.jpg\"><img decoding=\"async\" class=\"alignnone wp-image-16684 size-full\" src=\"https:\/\/www.flexijet.info\/wp-content\/uploads\/2025\/03\/About-Flexicad-Window-e1742408233722.jpg\" alt=\"\" width=\"333\" height=\"257\" \/><\/a><\/span><\/li>\n<\/ul>\n<ul>\n<li data-leveltext=\"-\" data-font=\"Aptos\" data-listid=\"1\" data-list-defn-props=\"{\" data-aria-posinset=\"57\" data-aria-level=\"1\"><span data-contrast=\"auto\">The size of the license activation window has been adjusted and reduced to ensure correct display at lower screen resolutions on client PCs.<\/span><br \/>\n<span data-ccp-props=\"{}\"> <a href=\"https:\/\/www.flexijet.info\/wp-content\/uploads\/2025\/03\/Licensemanager-screen-1.jpg\"><img decoding=\"async\" class=\"alignnone wp-image-16692 size-full\" src=\"https:\/\/www.flexijet.info\/wp-content\/uploads\/2025\/03\/Licensemanager-screen-e1742423946953.jpg\" alt=\"FlexiCAD Licensemanager window\" width=\"333\" height=\"239\" \/><\/a><\/span><\/li>\n<\/ul>\n<ul>\n<li data-leveltext=\"-\" data-font=\"Aptos\" data-listid=\"1\" data-list-defn-props=\"{\" data-aria-posinset=\"58\" data-aria-level=\"1\"><span data-contrast=\"auto\">The HiCAD XML output has been significantly expanded to support custom walls, floors, ceilings, sloping ceilings, 3D objects, and surfaces, greatly improving data integration and interoperability with other systems.<\/span><span data-ccp-props=\"{}\">\u00a0<\/span><\/li>\n<\/ul>\n<ul>\n<li data-leveltext=\"-\" data-font=\"Aptos\" data-listid=\"1\" data-list-defn-props=\"{\" data-aria-posinset=\"59\" data-aria-level=\"1\"><span data-contrast=\"auto\">When connecting endpoints to polylines and other elements, the correct segment of the polyline is now used, instead of always the last segment. If this removes segments of the polyline, a message is displayed and the elements that are removed are highlighted.<\/span><br \/>\n<a href=\"https:\/\/www.flexijet.info\/wp-content\/uploads\/2025\/03\/Connect-endpoints-polyline-segment-1.jpg\"><img decoding=\"async\" class=\"alignnone wp-image-16706 size-full\" src=\"https:\/\/www.flexijet.info\/wp-content\/uploads\/2025\/03\/Connect-endpoints-polyline-segment-e1742426319939.jpg\" alt=\"Connect Endpoints of polylines image\" width=\"333\" height=\"148\" \/><\/a><span data-ccp-props=\"{}\">\u00a0<\/span><\/li>\n<\/ul>\n<ul>\n<li data-leveltext=\"-\" data-font=\"Aptos\" data-listid=\"1\" data-list-defn-props=\"{\" data-aria-posinset=\"60\" data-aria-level=\"1\"><span data-contrast=\"auto\">A new, user-friendly update dialog now informs you about available updates. This dialog gives you the option to find out about <\/span><span data-contrast=\"auto\">optional <\/span><span data-contrast=\"auto\">service contracts, or to view the update information directly and download the update \u2013 without any login information.<\/span><span data-ccp-props=\"{}\">\u00a0<\/span><\/li>\n<\/ul>\n<p><span data-contrast=\"auto\">Feature<\/span><span data-contrast=\"auto\">s<\/span><span data-contrast=\"auto\">:<\/span><span data-ccp-props=\"{}\">\u00a0<\/span><\/p>\n<ul>\n<li data-leveltext=\"-\" data-font=\"Aptos\" data-listid=\"1\" data-list-defn-props=\"{\" data-aria-posinset=\"61\" data-aria-level=\"1\"><b><span data-contrast=\"auto\">Adjustable step height: <\/span><\/b><span data-contrast=\"auto\">The flexibility in staircase planning has been increased! The height of the stair treads can now be adjusted both in the general settings and in the export dialog for 3D-DWG and IFC.<br \/>\n<a href=\"https:\/\/www.flexijet.info\/wp-content\/uploads\/2025\/03\/Step-height-3D-View-1.jpg\"><img decoding=\"async\" class=\"alignnone wp-image-16698 size-full\" src=\"https:\/\/www.flexijet.info\/wp-content\/uploads\/2025\/03\/Step-height-3D-View-e1742425630222.jpg\" alt=\"\" width=\"333\" height=\"202\" \/><\/a><a href=\"https:\/\/www.flexijet.info\/wp-content\/uploads\/2025\/03\/General-Preferences-Step-Height-1.jpg\"><img decoding=\"async\" class=\"alignnone wp-image-16703\" src=\"https:\/\/www.flexijet.info\/wp-content\/uploads\/2025\/03\/General-Preferences-Step-Height-e1742426133287.jpg\" alt=\"\" width=\"207\" height=\"202\" \/><\/a><\/span><br \/>\n<span data-ccp-props=\"{}\">\u00a0<\/span><\/li>\n<\/ul>\n<ul>\n<li data-leveltext=\"-\" data-font=\"Aptos\" data-listid=\"1\" data-list-defn-props=\"{\" data-aria-posinset=\"62\" data-aria-level=\"1\"><b><span data-contrast=\"auto\">Convert Faces to Hatch: <\/span><\/b><span data-contrast=\"auto\">For improved compatibility and easier editing, a new feature has been added that allows you to convert Face objects to Solid Hatch during export.<\/span><br \/>\n<span data-ccp-props=\"{}\"> <a href=\"https:\/\/www.flexijet.info\/wp-content\/uploads\/2025\/03\/3D-DWG-export-areas-to-hatching-1.jpg\"><img decoding=\"async\" class=\"alignnone wp-image-16694 size-full\" src=\"https:\/\/www.flexijet.info\/wp-content\/uploads\/2025\/03\/3D-DWG-export-areas-to-hatching-e1742424304445.jpg\" alt=\"3D DWG Export Areas to hatching\" width=\"333\" height=\"396\" \/><\/a><\/span><\/li>\n<\/ul>\n<ul>\n<li data-leveltext=\"-\" data-font=\"Aptos\" data-listid=\"1\" data-list-defn-props=\"{\" data-aria-posinset=\"63\" data-aria-level=\"1\"><b><span data-contrast=\"auto\">Advanced Calculator: <\/span><\/b><span data-contrast=\"auto\">The calculator <\/span><span data-contrast=\"auto\">input<\/span><span data-contrast=\"auto\"> has been enhanced with adjustable shortcuts and now displays a history of the most recently used values, which significantly increases efficiency and ease of use.<\/span><br \/>\n<a href=\"https:\/\/www.flexijet.info\/wp-content\/uploads\/2025\/03\/Calculator-Quick-access-1.jpg\"><img decoding=\"async\" class=\"alignnone wp-image-16696 size-full\" src=\"https:\/\/www.flexijet.info\/wp-content\/uploads\/2025\/03\/Calculator-Quick-access-e1742424416407.jpg\" alt=\"\" width=\"333\" height=\"315\" \/><\/a><span data-ccp-props=\"{}\">\u00a0<\/span><\/li>\n<\/ul>\n<ul>\n<li data-leveltext=\"-\" data-font=\"Aptos\" data-listid=\"1\" data-list-defn-props=\"{\" data-aria-posinset=\"64\" data-aria-level=\"1\"><b><span data-contrast=\"auto\">Project Elements Parallel to Layer: <\/span><\/b><span data-contrast=\"auto\">Project elements parallel to a layer! A new feature allows for precise projection of elements parallel to a selected plane, providing greater <\/span><span data-contrast=\"auto\">flexibility in measuring <\/span><span data-contrast=\"auto\">and accuracy in <\/span><span data-contrast=\"auto\">editing<\/span><span data-contrast=\"auto\">.<\/span><span data-ccp-props=\"{}\">\u00a0<\/span><\/li>\n<\/ul>\n<ul>\n<li data-leveltext=\"-\" data-font=\"Aptos\" data-listid=\"1\" data-list-defn-props=\"{\" data-aria-posinset=\"65\" data-aria-level=\"1\"><b><span data-contrast=\"auto\">Output<\/span><\/b><b><span data-contrast=\"auto\"> Parts list<\/span><\/b><b><span data-contrast=\"auto\"> to PDF: <\/span><\/b><span data-contrast=\"auto\">Extended <\/span><span data-contrast=\"auto\">Parts List<\/span><span data-contrast=\"auto\"> functionality! Items from your <\/span><span data-contrast=\"auto\">Parts List <\/span><span data-contrast=\"auto\">can now be seamlessly inserted into the PDF output on a separate page.<\/span><br \/>\n<span data-ccp-props=\"{}\"> <a href=\"https:\/\/www.flexijet.info\/wp-content\/uploads\/2025\/03\/Parts-list-PDF-tool-settings-e1742423618116.jpg\"><img decoding=\"async\" class=\"alignnone wp-image-16688 size-full\" src=\"https:\/\/www.flexijet.info\/wp-content\/uploads\/2025\/03\/Parts-list-PDF-tool-settings-e1742423618116.jpg\" alt=\"PDF tool with Parts list option highlighted\" width=\"333\" height=\"183\" \/><\/a><a href=\"https:\/\/www.flexijet.info\/wp-content\/uploads\/2025\/03\/Parts-list-PDF-output-1.jpg\"><img decoding=\"async\" class=\"alignnone wp-image-16690\" src=\"https:\/\/www.flexijet.info\/wp-content\/uploads\/2025\/03\/Parts-list-PDF-output.jpg\" alt=\"PDF output showing parts list thumbnail\" width=\"182\" height=\"183\" \/><\/a><\/span><\/li>\n<\/ul>\n<ul>\n<li data-leveltext=\"-\" data-font=\"Aptos\" data-listid=\"1\" data-list-defn-props=\"{\" data-aria-posinset=\"66\" data-aria-level=\"1\"><b><span data-contrast=\"auto\">Create <\/span><\/b><b><span data-contrast=\"auto\">Gap<\/span><\/b><b><span data-contrast=\"auto\">: <\/span><\/b><span data-contrast=\"auto\">Precise joint creation made easy! A new modification tool allows you to create a joint with a defined width by selecting an intersecting line.<\/span><span data-ccp-props=\"{}\"> <img decoding=\"async\" class=\"alignnone size-full wp-image-16327\" src=\"https:\/\/www.flexijet.info\/en\/wp-content\/uploads\/2025\/04\/Seam-Button-FJS-4.png\" alt=\"Seam button in Flexijet Stone 4\" width=\"45\" height=\"94\" \/><\/span><\/li>\n<\/ul>\n<ul>\n<li data-leveltext=\"-\" data-font=\"Aptos\" data-listid=\"1\" data-list-defn-props=\"{\" data-aria-posinset=\"68\" data-aria-level=\"1\"><b><span data-contrast=\"auto\">Create <\/span><\/b><b><span data-contrast=\"auto\">Seam<\/span><\/b><b><span data-contrast=\"auto\">: <\/span><\/b><span data-contrast=\"auto\">Precise object <\/span><span data-contrast=\"auto\">seaming <\/span><span data-contrast=\"auto\">made easy! A new modification tool allows you to create a <\/span><span data-contrast=\"auto\">Seam <\/span><span data-contrast=\"auto\">by selecting an intersecting line, making it easy to divide objects into two parts. Optionally, a distance can be entered for <\/span><span data-contrast=\"auto\">moving <\/span><span data-contrast=\"auto\">the objects apart.<\/span><span data-ccp-props=\"{}\"> <img decoding=\"async\" class=\"alignnone size-full wp-image-16328\" src=\"https:\/\/www.flexijet.info\/en\/wp-content\/uploads\/2025\/04\/GAp-Button-FJS-4.png\" alt=\"Gap Button Flexijet Stone 4\" width=\"90\" height=\"94\" \/><\/span><\/li>\n<\/ul>\n<ul>\n<li data-leveltext=\"-\" data-font=\"Aptos\" data-listid=\"1\" data-list-defn-props=\"{\" data-aria-posinset=\"70\" data-aria-level=\"1\"><b><span data-contrast=\"auto\">Automatic dimensioning with options: <\/span><\/b><span data-contrast=\"auto\">Complete control over automatic dimensioning! A new feature allows for detailed adjustment of automatic dimensioning, including:\u00a0<\/span><span data-ccp-props=\"{}\">\u00a0<\/span><\/li>\n<\/ul>\n<ul>\n<li data-leveltext=\"o\" data-font=\"Courier New\" data-listid=\"1\" data-list-defn-props=\"{\" data-aria-posinset=\"1\" data-aria-level=\"2\"><span data-contrast=\"auto\">Selecting the Dimension Style for Length Dimensions<\/span><span data-ccp-props=\"{}\">\u00a0<\/span><\/li>\n<\/ul>\n<ul>\n<li data-leveltext=\"o\" data-font=\"Courier New\" data-listid=\"1\" data-list-defn-props=\"{\" data-aria-posinset=\"2\" data-aria-level=\"2\"><span data-contrast=\"auto\">Selecting the Dimension Style for Angular Dimensions<\/span><span data-ccp-props=\"{}\">\u00a0<\/span><\/li>\n<\/ul>\n<ul>\n<li data-leveltext=\"o\" data-font=\"Courier New\" data-listid=\"1\" data-list-defn-props=\"{\" data-aria-posinset=\"3\" data-aria-level=\"2\"><span data-contrast=\"auto\">Selecting the Dimension Style for Diameter Dimensions<\/span><span data-ccp-props=\"{}\">\u00a0<\/span><\/li>\n<\/ul>\n<ul>\n<li data-leveltext=\"o\" data-font=\"Courier New\" data-listid=\"1\" data-list-defn-props=\"{\" data-aria-posinset=\"4\" data-aria-level=\"2\"><span data-contrast=\"auto\">Specifying a Range of Length for Automatic Line Dimensioning<\/span><span data-ccp-props=\"{}\">\u00a0<\/span><\/li>\n<\/ul>\n<ul>\n<li data-leveltext=\"o\" data-font=\"Courier New\" data-listid=\"1\" data-list-defn-props=\"{\" data-aria-posinset=\"5\" data-aria-level=\"2\"><span data-contrast=\"auto\">Activation\/deactivation of automatic diameter dimensioning of circles. <\/span><br \/>\n<span data-ccp-props=\"{}\">\u00a0<\/span><\/li>\n<\/ul>\n<ul>\n<li data-leveltext=\"-\" data-font=\"Aptos\" data-listid=\"1\" data-list-defn-props=\"{\" data-aria-posinset=\"71\" data-aria-level=\"1\"><b><span data-contrast=\"auto\">Simplify Polyline: <\/span><\/b><span data-contrast=\"auto\">Optimize your polylines with ease! A new feature allows you to simplify complex polyline contours within a set tolerance, reducing the number of points while maintaining the desired accuracy<\/span><span data-contrast=\"auto\"> for simplified machining.<\/span><span data-ccp-props=\"{}\">\u00a0<\/span><\/li>\n<\/ul>\n<ul>\n<li data-leveltext=\"-\" data-font=\"Aptos\" data-listid=\"1\" data-list-defn-props=\"{\" data-aria-posinset=\"72\" data-aria-level=\"1\"><b><span data-contrast=\"auto\">Multi Polyline<\/span><\/b><b><span data-contrast=\"auto\"> (<\/span><\/b><b><span data-contrast=\"auto\">S<\/span><\/b><b><span data-contrast=\"auto\">implified): <\/span><\/b><span data-contrast=\"auto\">Measure and optimize complex polylines in one step! This new command allows you to create a polyline whose contour is automatically simplified within a specified tolerance when the measurement is complete. This function is an efficient extension of the <\/span><span data-contrast=\"auto\">\u2018Multi Polyline\u2019<\/span><span data-contrast=\"auto\"> function.<\/span><span data-ccp-props=\"{}\">\u00a0<\/span><\/li>\n<\/ul>\n<ul>\n<li data-leveltext=\"-\" data-font=\"Aptos\" data-listid=\"1\" data-list-defn-props=\"{\" data-aria-posinset=\"73\" data-aria-level=\"1\"><b><span data-contrast=\"auto\">Create <\/span><\/b><b><span data-contrast=\"auto\">Backsplash<\/span><\/b><b><span data-contrast=\"auto\"> with polar tracking: <\/span><\/b><span data-contrast=\"auto\">Draw kitchen <\/span><span data-contrast=\"auto\">backsplashes <\/span><span data-contrast=\"auto\">with precision and ease! The <\/span><span data-contrast=\"auto\">\u2018Backsplash\u2019 <\/span><span data-contrast=\"auto\">command now supports Polar Tracking, so you can easily create kitchen <\/span><span data-contrast=\"auto\">backsplashes <\/span><span data-contrast=\"auto\">at specific angles and orientations.<br \/>\n<a href=\"https:\/\/www.flexijet.info\/wp-content\/uploads\/2025\/03\/Backsplash-polar-tracking-1.jpg\"><img decoding=\"async\" class=\"alignnone wp-image-16709 size-full\" src=\"https:\/\/www.flexijet.info\/wp-content\/uploads\/2025\/03\/Backsplash-polar-tracking-e1742426430467.jpg\" alt=\"\" width=\"333\" height=\"301\" \/><\/a><\/span><br \/>\n<span data-ccp-props=\"{}\">\u00a0<\/span><\/li>\n<\/ul>\n<p><span data-ccp-props=\"{}\">\u00a0<\/span><\/p>\n<\/div><\/div><\/div><\/section>\n<section class='av_toggle_section av-m6jf5tgh-dbdfa28d4955d1be675bb4db92cf3d03'  itemscope=\"itemscope\" itemtype=\"https:\/\/schema.org\/CreativeWork\" ><div role=\"tablist\" class=\"single_toggle\" data-tags=\"{All} \"  ><p id='toggle-flexicad-update-4.0.1.0' data-fake-id='#flexicad-update-4.0.1.0' class='toggler  av-title-above '  itemprop=\"headline\"  role='tab' tabindex='0' aria-controls='flexicad-update-4.0.1.0' data-slide-speed=\"200\" data-title=\"FlexiCAD version 4.0.1.0 \u2013 release date: 14.11.2024\" data-title-open=\"\" data-aria_collapsed=\"Click to expand: FlexiCAD version 4.0.1.0 \u2013 release date: 14.11.2024\" data-aria_expanded=\"Click to collapse: FlexiCAD version 4.0.1.0 \u2013 release date: 14.11.2024\">FlexiCAD version 4.0.1.0 \u2013 release date: 14.11.2024<span class=\"toggle_icon\"><span class=\"vert_icon\"><\/span><span class=\"hor_icon\"><\/span><\/span><\/p><div id='flexicad-update-4.0.1.0' aria-labelledby='toggle-flexicad-update-4.0.1.0' role='region' class='toggle_wrap  av-title-above'  ><div class='toggle_content invers-color '  itemprop=\"text\" ><p><strong>This update brings important improvements and optimizations to FlexiCAD to make your working experience even more efficient and enjoyable.<\/strong><\/p>\n<h3>Improved stability and reliability:<\/h3>\n<ul>\n<li>The measurement preview on the Flexijet display is now always displayed correctly, even if the additional function \u201cMeasure on sphere\u201d is activated during the \u201cDefine location\u201d function.<\/li>\n<li>The 3D view and the 3D DWG export have been optimized and now ensure that 3D objects are displayed and exported correctly.<\/li>\n<li>The layer structure in the project explorer has been improved to ensure the stability and consistency of your projects.<\/li>\n<li>The \u201cTrim\u201d and \u201cRound\u201d functions have been revised and now deliver precise results in all cases.<\/li>\n<li>The import of colors has been optimized so that the setting \u201cUse colors \u2018From layer\u2019 as pen color\u201d now has the desired effect.<\/li>\n<li>A bug has been fixed in FlexijetStone that affected reliable image generation in the \u201cApproach and photograph\u201d function.<\/li>\n<\/ul>\n<h3>Extended functionality:<\/h3>\n<ul>\n<li>FlexijetStone: The \u201cInsert sink section\u201d function now takes the layer color into account for an even more precise display.<\/li>\n<li>FlexijetStone: The \u201cApproach and photograph\u201d function has been optimized and now allows you to enter an offset on horizontal layers. In addition, the function can now only be selected when a Flexijet is connected to ensure smooth operation.<\/li>\n<li>Switching to the fine drive by pressing and holding the scroll wheel on the Flexijet is now even more reliable.<\/li>\n<\/ul>\n<\/div><\/div><\/div><\/section>\n<section class='av_toggle_section av-m6jf7nuy-bebbf46533b29465b4427d32d7826593'  itemscope=\"itemscope\" itemtype=\"https:\/\/schema.org\/CreativeWork\" ><div role=\"tablist\" class=\"single_toggle\" data-tags=\"{All} \"  ><p id='toggle-flexijet-3d-version-4.0.0.0' data-fake-id='#flexijet-3d-version-4.0.0.0' class='toggler  av-title-above '  itemprop=\"headline\"  role='tab' tabindex='0' aria-controls='flexijet-3d-version-4.0.0.0' data-slide-speed=\"200\" data-title=\"FlexiCAD version 4.0.0.0 \u2013 release date: 07.10.2024\" data-title-open=\"\" data-aria_collapsed=\"Click to expand: FlexiCAD version 4.0.0.0 \u2013 release date: 07.10.2024\" data-aria_expanded=\"Click to collapse: FlexiCAD version 4.0.0.0 \u2013 release date: 07.10.2024\">FlexiCAD version 4.0.0.0 \u2013 release date: 07.10.2024<span class=\"toggle_icon\"><span class=\"vert_icon\"><\/span><span class=\"hor_icon\"><\/span><\/span><\/p><div id='flexijet-3d-version-4.0.0.0' aria-labelledby='toggle-flexijet-3d-version-4.0.0.0' role='region' class='toggle_wrap  av-title-above'  ><div class='toggle_content invers-color '  itemprop=\"text\" ><h3>New functions:<\/h3>\n<p><strong>FlexiCAD:<\/strong><\/p>\n<ul>\n<li>New design of the FlexiCAD interface: Function buttons with submenus are now separated to make it easier to recognize that further commands are available.<\/li>\n<li>The &#8220;Manual room from floor plan&#8221; function has been added to the submenu of the &#8220;Room from floor plan&#8221; function. The corners of the floor plan must be selected manually.<\/li>\n<li>The function &#8220;Show angles between planes&#8221;: Displays all angles of the active layer to other layers in the drawing. Accessed by right-clicking on a folder and selecting Layer &gt; Show angles between layers.<\/li>\n<li>It is now possible to create 3D objects from closed polyline contours: Selecting the polyline and defining the object height and type (e.g. 3D object, wall, floor, ceiling, surface, fume cupboard).<\/li>\n<li>New &#8220;3D view&#8221; tab: Interactive preview of the model in different visualization styles to check the details before exporting.<\/li>\n<li>New export interfaces:<br \/>\n&#8211; IFC export<br \/>\n&#8211; 3D DWG export<br \/>\n&#8211; XML export to Intrekon and HiCAD<br \/>\n&#8211; MegaCAD export of a 3D DWG with images<br \/>\n&#8211; Export to Cabinet Vision for simple rooms (XML+DXF)<\/li>\n<li>In the 3D view, the model can now be rotated with Shift + middle mouse button.<\/li>\n<li>New license server for more efficient license management.<\/li>\n<\/ul>\n<p><strong>Flexijet:<\/strong><\/p>\n<ul>\n<li>A horizontal plane can now be created on the Flexijet by entering a Z value. This function is available when creating a new horizontal plane or when &#8220;measuring floor plan&#8221;.<\/li>\n<li>Fine adjustments to the Flexijet laser are now possible using the scroll wheel: when the command is active, the fine drive can be activated by pressing and holding the scroll wheel to precisely control the Flexijet. The direction of travel can be changed by tapping the arrow in the new menu.<\/li>\n<li>The Flexijet interface can now be mirrored to the PC via the livestream; commands can be controlled using the mouse.<\/li>\n<li>The laser module is automatically switched off when inactive to save battery power and service life. The switch-off time can be adjusted in the &#8220;general settings&#8221;; the laser is automatically activated when there is activity.<\/li>\n<li>Several functions can now be switched directly on the display in the &#8220;polyline&#8221; drawing command: Polyline as line\/straight line or arc (optionally with tangential transition).<\/li>\n<li>The Flexijet can now be operated via a network cable (special adapter required). If required, please contact support.<\/li>\n<li>After completing the &#8220;Align to object&#8221; function, a confirmation is shown on the display.<\/li>\n<li>Context-related help images are now displayed during the execution of a command to visually support the correct measurement position. For simple commands such as the polyline, the corresponding symbol is displayed in the preview to make the active command clearly recognizable.<\/li>\n<\/ul>\n<p><strong>Flexijet Smart Remote App:<\/strong><\/p>\n<ul>\n<li>Various commands can now be started directly via the Smart Remote app.<\/li>\n<li>Navigation through the folders in the project explorer is now possible.<\/li>\n<li>The user interface has been adapted: If no command is active, the app is in the command view; if a command is active, remote control mode is automatically activated.<\/li>\n<\/ul>\n<hr \/>\n<h3>Improvements:<\/h3>\n<p><strong>FlexiCAD:<\/strong><\/p>\n<ul>\n<li>The quick dimensioning now considers lines with a radius at the end and measures to the intersection of the next line instead of just to the start of the radius.<\/li>\n<li>The &#8220;Number parts&#8221; function now includes the set pen color.<\/li>\n<li>Measurement series are no longer aborted if a point cannot be measured; instead, the point is skipped and the measurement is continued.<\/li>\n<li>Revision of the export dialog: The selection of various DWG, DXF and IFC formats is now available directly in the export dialog, which increases clarity.<\/li>\n<li>When moving a plane, all elements except the measuring points are moved to the new plane, eliminating the need for manual 2D projection.<\/li>\n<li>The &#8220;Export&#8221; &gt; &#8220;Export subfolders to separate files&#8221; function now allows you to select specific folders for export.<\/li>\n<li>Paragraphs in notes are now correctly taken into account in the PDF output.<\/li>\n<li>The livestream window can be configured so that it always remains in the foreground to prevent it from moving to the background when commands are executed.<\/li>\n<\/ul>\n<p><strong>Flexijet:<\/strong><\/p>\n<ul>\n<li>Images taken with the camera live image active use the currently set zoom level; the zoom is reset when the live image is deactivated.<\/li>\n<li>The function &#8220;Measure door, not relevant to planning&#8221; on the Flexijet now uses the last values saved in FlexiCAD instead of the default values. Changes must still be made in FlexiCAD.<\/li>\n<\/ul>\n<hr \/>\n<h3>Bugfixes:<\/h3>\n<p><strong>FlexiCAD:<\/strong><\/p>\n<ul>\n<li>An error has been fixed where the &#8220;Show CAD points from drawing&#8221; function was continued although it was canceled.<\/li>\n<li>Fixed a bug where a user-defined installation symbol could incorrectly create a new layer in FlexiCAD.<\/li>\n<li>Fixed a bug that caused the steps not to be rotated to the XY plane when exporting a 3D staircase with the &#8220;Arrange elements&#8221; and &#8220;Rotate elements to XY plane&#8221; options.<\/li>\n<\/ul>\n<p><strong>Flexijet:<\/strong><\/p>\n<ul>\n<li>A bug has been fixed that made it possible to activate an installation icon by double-clicking on the Flexijet 2x display, which could cause a software crash.<\/li>\n<li>Fixed a problem where the letter keyboard was displayed although a number input was expected.<\/li>\n<li>Correction of a bug that caused the keyboard to be displayed in the German layout after restarting the Flexijet, even if another language was previously selected.<\/li>\n<\/ul>\n<\/div><\/div><\/div><\/section>\n<\/div>\n","protected":false},"excerpt":{"rendered":"","protected":false},"author":24,"featured_media":0,"parent":15854,"menu_order":29,"comment_status":"closed","ping_status":"closed","template":"","meta":{"cybocfi_hide_featured_image":"","footnotes":""},"class_list":["post-16032","page","type-page","status-publish","hentry"],"_links":{"self":[{"href":"https:\/\/www.flexijet.info\/en\/wp-json\/wp\/v2\/pages\/16032","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.flexijet.info\/en\/wp-json\/wp\/v2\/pages"}],"about":[{"href":"https:\/\/www.flexijet.info\/en\/wp-json\/wp\/v2\/types\/page"}],"author":[{"embeddable":true,"href":"https:\/\/www.flexijet.info\/en\/wp-json\/wp\/v2\/users\/24"}],"replies":[{"embeddable":true,"href":"https:\/\/www.flexijet.info\/en\/wp-json\/wp\/v2\/comments?post=16032"}],"version-history":[{"count":34,"href":"https:\/\/www.flexijet.info\/en\/wp-json\/wp\/v2\/pages\/16032\/revisions"}],"predecessor-version":[{"id":17157,"href":"https:\/\/www.flexijet.info\/en\/wp-json\/wp\/v2\/pages\/16032\/revisions\/17157"}],"up":[{"embeddable":true,"href":"https:\/\/www.flexijet.info\/en\/wp-json\/wp\/v2\/pages\/15854"}],"wp:attachment":[{"href":"https:\/\/www.flexijet.info\/en\/wp-json\/wp\/v2\/media?parent=16032"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}