Flexijet Stairbox360°
… if you want to measure more!
… if you want to measure more!
… if you want to measure more!
For this purpose, the measuring head of the Flexijet Stairbox360° can be removed from the angled stop bar and placed centrally on the surface to be measured.
The detection then takes place in 360 degrees, around the Flexijet Stairbox360°. Each individual measuring point is immediately available in the CAD software.
The measuring tip for the step allowance can be swiftly …
… the digitizing pen can be exchanged with a spirit level.
In addition to the classic Stairbox software which is optimized for the simple measurement of steps and staircases, the Stairbox360 ° model, is delivered with a 2D edition of our FlexiCAD measurement software.
In this special 2D measuring software of the Flexijet Stairbox 360°, both point and contour measurements can be recorded in 360 degrees around the measuring device, without the zero point referring to the stop angle of the Stairbox. Various CAD drawing commands allow the linking of several measuring points to meaningful geometries, so that an immediate control between drawing and reality can take place. In addition, the allowance CAD offers useful functions, such as: For example, the intersection of lines and automatic dimensioning.
Measured data can then be transferred in various CAD formats to planning programs, direct to the CNC or the plotter.
Laptop or tablet PC not included.